Building a smart home with HUF HAUS
We're planning a smart home with HUF HAUS. How exactly that works, what experiences we're having and more – find out here.

We're starting one of the big projects you can take on in life: building our own house. And of course it has to be as connected (smart) as possible – or, to put it in fancy terms, it has to be a smart home. As a tech geek, I'm not necessarily concerned with whether this or that is strictly necessary. Above all, I want to make sure that I lay the right foundations now to be ready for an even more connected future.
There are a few challenges to master when you think about a smart home:
- Cyber security
The more digital and connected a building is, the more important cyber security becomes. - Avoiding (reducing) proprietary systems
I don't want to give any single vendor sole control over my home systems. - Vendor independence
I want the flexibility to connect different systems (hardware and software). - Using open source systems
I'm a big advocate of open source and therefore want to build as much as possible with free code. - Ensuring data sovereignty
I want to keep (sensitive) data with me as much as possible and/or ensure it is encrypted. - Reliability
The building's basic functions must keep working even if the internet goes down or the connection drops. - Functional reliability and usability
Other users in the family must also be able to operate the basic systems easily. It would be pointless if you first needed training to interact with the building.
Our smart home project
To start, perhaps a quick overview of the basic conditions to give you a feel for the project:
- Floors: 1.5 (basement, ground floor, upper floor)
- Construction period: 2023
- Builder: HUF HAUS
- Use cases:
- Energy monitoring
- Power generation of the PV system
- Energy use via EV charging station
- Home battery management
- Load management
- Blind control
- Lighting control
- Ventilation control
- Access control and permission management
- Security cameras
- Irrigation control
- Energy monitoring
- Protocols:
- Matter
- ZigBee
- Networks and bus systems:
- KNX
- WiFi
In the end, I'd like to be able to map all use cases on my mobile device (smartphone or tablet). For this, I currently have my eye on Home Assistant, which I'd like to run on a Raspberry Pi cluster server. To address reliability, we'll handle the core KNX control (including remote access) with the Gira S1 and X1 system. That way, the Raspberry can crash or the internet can go down, and you can still access the core building systems connected via KNX from your mobile device.
Planned technical equipment in the smart home
After talks with HUF HAUS, research online and other sources, I currently have my eye on the following devices:
| Type | Device |
|---|---|
| Home battery | BYD HVS 12.8 |
| Inverter | Sunny Tripower Smart Energy 10.0 + Sunny Home Manager 2.0 |
| Lights | Philips Hue (I also use the bridge to connect other ZigBee devices) or Shellys |
| Switch | Switch Pro 48 PoE |
| Gateway and firewall | Dream Machine Pro |
| Surveillance cameras | G4 Dome, G4 Bullet |
| Access points | UniFi6 Lite |
| Garden | Gardena Smart Garden devices |
| KNX system | Gira combination of X1 and S1 |
| Light switches | Jung LS990 product line |
| Homeassistant server | Raspberry Pi cluster |
Sketched connectivity and network diagram of the smart home
To give my thoughts and ideas some structure, I started mapping everything out in Lucid Chart. In doing so, I noticed that I'm still unsure about control during an internet outage. That's essential, because experience shows that internet outages do happen. My solution to the problem is a dedicated Gira tablet. It can interact with the entire home control system (now also remotely) and is there solely for this function. In the past, it had to be hard-wired via KNX – the new ones use the WiFi network. I'm still torn on whether I should wire this backup solution as well, just to be completely safe.
For all "normal" users of the house, I have my eye on the Homeassistant solution. It's open source (yeah) and, thanks to its great community, can talk to almost every device.
I've planned network separation, control and monitoring via the Unifi Dream Machine from Ubiquiti. With so many devices, it's important to me to have full transparency over the network and the network traffic.
Opinions about Ubiquiti differ widely online (as on every topic). Some swear by it, some give the products a wide berth. I struggled with it too, because I generally attach great importance to being in control of my data, yet here I'm knowingly accepting another cloud connection. Yes, that's true. Still, the broad product range won me over. I also found integrations for everything, e.g. with Homeassistant – including from the security cameras to the Gira tablet (backup).
I'm also a fan of beautiful, elegant and good (GUI) design – so far I haven't seen it done as nicely by any other manufacturer as by Ubiquiti. But if you have other recommendations, bring them on.
I'll get the internet connection from Pyur. They are the provider for fiber connections in our municipality. I haven't had any experience with them myself yet, but the neighbors haven't reported anything negative so far. Telekom can only lay a copper line (which is completely beyond me for a new development area) and guarantee 25 Mbit/s. With Pyur I now get 1,000 Mbit/s (40x faster!!!), i.e. 1 Gbit. The speeds will matter later for the various devices, so that I don't accidentally install a bottleneck somewhere. When I applied for the utility connection with the municipal utility, I was automatically registered with Telekom as the builder and an internet connection was ordered. Apparently this is an automatic process, but if you don't want copper, you have to stop and cancel the order manually. Why orders for copper connections are still being created in new development areas these days just won't get into my head...
Next steps
Right now, I'm having various experts challenge my thoughts and drafts. I'm also still trying to work out the right schedule for when it's best to order. Things are pretty hectic on the world market at the moment, and I want to avoid running into any shortages later. On the other hand, I'm still hoping prices will ease. We'll see. I'll keep you posted.